Instructions For Studding A Tire - Bruno Wessel. Never operate tire studding or other equipment without proper safety equipment. Shop approved safety glasses and work gloves should always be used for your own protection. Place the tire to be studded over the mandreal (aluminum shoe) of the K- 5 stand.

Unless the tire stud size is already identified, follow the following general guidline. Measure the depth of the hole to be studded with a tire tread depth gauge. If the measurement is 1. If the measurement is 1. The timing of steps 4, 5 and 6 are important and take some time to learn.

How to Break the Bead and Change a Tire on a One Piece Wheel. You need a Highlift jack. Take a tire and let all the air out by removing the valve core. Page 142 Land Cruiser 40 Series Spare Tire Carrier Land Cruiser, 40 series Spare Tire Carrier, assembly, bushings, hinges, Specter Off-Road is the undisputed Toyota. Hmmwv drop down spare tire carrier instructions document: 2590-01-525-1995 install page: 2 of 12 approved by: mark bradley issue date. Weather Updates D I Khan Map.

Only trained personnel should service this equipment. Windows Media Player 11 Final Windows Validation In Process there. The steel head assembly of the stud guns is spring loaded. Use extreme caution when disassembling. A properly installed stud should appear to be nearly flush with the tire surface. Only the carbide pin and about 1/3. Also, be sure that the stud is inserted straight into the hole. A leaning stud will not properly seat into the tire and will cause premature failure.

Here at B-Line, we specialize in Tire supplies, Shop Equipment and Automotive/Carwash supplies. We have fully stocked warehouses throughout Quebec, the Maritimes.

The customer should drive normally (try to avoid hard cornering, acceleration and braking) for a few days or so (approx.